2WD Drift Conversion Kit for Tamiya TT-01

Make Tamiya TT-01 2WD and increase the turning angle of the front tires.
Compatible with all types of Tamiya TT-01, some processing is required.
Please prepare the body and mechanism of TT-01 separately.
In addition to TT-01 and mecha, gyro and 8mm offset wheels and drift tires are required for 2WD drifting.

Set contents
(1) Set screw (2) Screw small x 2, large x 3 (3) Open adjuster small x 2, large x 2 (4) Ball nut (5) Turnbuckle large x 1, small x 2 (6) Wiper Post x 2 (7) Spacer 3mm x 1, 1mm x 2 (8) Axle x 2 (9) Pillow ball x 10 (10) Bearing x 8 (11) Washer x 4 (12) Adjuster x 8

Make Tamiya TT-01 2WD and increase the turning angle of the front tires.
Compatible with type E and type D (drift spec).

■Differences from a full set
　●Removing the plastic part from the kit for the axle x2 and diverting it
　●Diverting the wiper plastic ring x4 (Please prepare 850 bearing or 850 flange bearing separately for the old type)
　●Turnbuckle x3

Please prepare the TT-01 body and mechanism separately .
In addition to TT-01 and mecha, gyro and 8mm offset wheels and drift tires are required for 2WD drifting.

Set contents
Plastic parts set (wiper, lower arm, knuckle, upper arm)
pillow ball x 8 adjuster large adjuster small x 8 open adjuster large open adjuster small x 2 aluminum ball nut x 3
hollow screw 12 mm × 6 hollow screw 18 mm × 6 hollow screw 25 mm screw 18mm screw 16mm x 2 aluminum post x 2 spacer 3mm bearing x 4

Make Tamiya TT-01 2WD and increase the turning angle of the front tires. Some processing is required.
Please prepare the body and mechanism of TT-01 separately.
Only the minimum number of screws are included, so please prepare adjusters, pillow balls, etc. separately.

Set contents
Plastic parts set (wiper, lower arm, knuckle, upper arm)
Enameled screw 12mm x 6 Enameled screw 18mm x 6 Enameled screw 25mm Screw 18mm Screw 16mm x 2 Aluminum post x 2 Spacer 3mm